01.02.2011, 17:55
Aus den Bug-Reports, Patch-Infos, den offen liegenden Quelltexten und Log-Dateien des MeeGo OS lassen sich immer wieder neue technische Details der zur Zeit genutzten Entwicklungsplattformen für MeeGo herauskitzeln. Die enthaltenen Details geben Rückschlüsse auf verbaute Hardware und Revisionen, die auch in zukünftigen Geräten Einsatz finden könnten, bzw. finden werden.
Aus den aktuellen Fundstücken zur MeeGo Plattform gibt es hier eine ausführliche Aufstellung der Hardware von einer aktuellen MeeGo Entwicklungsplattform auf Intels Atom-Basis.
Details des MeeGo Development Device, das unter dem Codename *CDK bekannt ist.
CPU - Intel 1,6 GHz
RAM - 1 GB
- High Level Memory: 117MB
- Low Level Memory: 889MB
CLK
- Reference/System Clock: 19,2MHz
- DSP Clock: 440MHz
- Memory Clock: 26MHz
- Grapcics clock (LNC core): 200MHz
Video
- Graphics Memory: 512MB
- HDMI
- Display: 480 x 854 Pixel
GPS - Broadcom BCM4751
- Single chip GSM
- A-GPS
NFC - NPX Semiconductors PN544 NFC Controller
- HT80C51MX Core processor
- up 424kBit/s
- all NFC standards
- NFC-WI Secure interface
- RAM: 5K; ROM: 128K; EEPROM: 52K
- 10cm oprating distance
UART - Maxim MAX3110
- RS232
- 300baud - 230kbaud max
- Freq: 3.125MHz
Audio - Intel HD Audio - ALSA
LAN
- Intel PRO/1000 - 1 GBit Ethernet
- Intel PRO/100 - 100 MBit Ethernet
- IPv4 / IPv6
UBS
- USB 1.1 (OHCI)
- USB 2.0 (EHCI)
- USB Mass Storage
- USB On-The-Go (penwell_otg)
Mass Memory Interfaces
- MMC1
- MMC2
- MMC3
- MMC4
- SDHC Interface (ADMA)
Touch
- Cypress True Touch Controller
- Atmel maXTouch Touchscreen/Controller (MXT224?)
I/O Expander - Toshiba TC35894XBG
- up to 24 GenIO ports
- support for 26 keys
RF - Infineon XMM 6260 3G modem (???)
- HSPA+
Connectivitiy
Texas Instruments WiLink 6.0 (WL1271)
- WLAN
- Bluetooth v2.1 + EDR
- FM Radio (Transmitter/Receiver)
Bluetooth
- Profile: L2CAP, SCO, RFCOMM, BNEP, HIDP
- Core Version: 2.15
WLAN
- Standards: a (54MBit/s) / b (12MBit/s) / g (54MBit/s), n (300MBit/s)
Camera Interfaces: 2
- Camera 1 @ I2C
- Camera 2 @ I2C
Sensors
Avago APDS980x series
- Ambient Light Sensor APDS9802als (analogue)
- Proximity Sensor APDS9802ps (digital)
Accelerometer - STMicroelectronics LIS3LV02DL
- MEMS inetrial sensor, 3-axis
- Measurement range: +2g/-2g + +6g/-6g
- 16 Bit
Magnetometer - AKM Semiconductors AK8974
- 3-axis electronic ompass
Else
Thermal zone 1, 2, 3
Lunix media interface
Linux video capture interface
PCI SSP Controller
Filesystem - EXT3
[ExiTuS]
Aus den aktuellen Fundstücken zur MeeGo Plattform gibt es hier eine ausführliche Aufstellung der Hardware von einer aktuellen MeeGo Entwicklungsplattform auf Intels Atom-Basis.
Details des MeeGo Development Device, das unter dem Codename *CDK bekannt ist.
CPU - Intel 1,6 GHz
RAM - 1 GB
- High Level Memory: 117MB
- Low Level Memory: 889MB
CLK
- Reference/System Clock: 19,2MHz
- DSP Clock: 440MHz
- Memory Clock: 26MHz
- Grapcics clock (LNC core): 200MHz
Video
- Graphics Memory: 512MB
- HDMI
- Display: 480 x 854 Pixel
GPS - Broadcom BCM4751
- Single chip GSM
- A-GPS
NFC - NPX Semiconductors PN544 NFC Controller
- HT80C51MX Core processor
- up 424kBit/s
- all NFC standards
- NFC-WI Secure interface
- RAM: 5K; ROM: 128K; EEPROM: 52K
- 10cm oprating distance
UART - Maxim MAX3110
- RS232
- 300baud - 230kbaud max
- Freq: 3.125MHz
Audio - Intel HD Audio - ALSA
LAN
- Intel PRO/1000 - 1 GBit Ethernet
- Intel PRO/100 - 100 MBit Ethernet
- IPv4 / IPv6
UBS
- USB 1.1 (OHCI)
- USB 2.0 (EHCI)
- USB Mass Storage
- USB On-The-Go (penwell_otg)
Mass Memory Interfaces
- MMC1
- MMC2
- MMC3
- MMC4
- SDHC Interface (ADMA)
Touch
- Cypress True Touch Controller
- Atmel maXTouch Touchscreen/Controller (MXT224?)
I/O Expander - Toshiba TC35894XBG
- up to 24 GenIO ports
- support for 26 keys
RF - Infineon XMM 6260 3G modem (???)
- HSPA+
Connectivitiy
Texas Instruments WiLink 6.0 (WL1271)
- WLAN
- Bluetooth v2.1 + EDR
- FM Radio (Transmitter/Receiver)
Bluetooth
- Profile: L2CAP, SCO, RFCOMM, BNEP, HIDP
- Core Version: 2.15
WLAN
- Standards: a (54MBit/s) / b (12MBit/s) / g (54MBit/s), n (300MBit/s)
Camera Interfaces: 2
- Camera 1 @ I2C
- Camera 2 @ I2C
Sensors
Avago APDS980x series
- Ambient Light Sensor APDS9802als (analogue)
- Proximity Sensor APDS9802ps (digital)
Accelerometer - STMicroelectronics LIS3LV02DL
- MEMS inetrial sensor, 3-axis
- Measurement range: +2g/-2g + +6g/-6g
- 16 Bit
Magnetometer - AKM Semiconductors AK8974
- 3-axis electronic ompass
Else
Thermal zone 1, 2, 3
Lunix media interface
Linux video capture interface
PCI SSP Controller
Filesystem - EXT3
[ExiTuS]